China Liquid Immersed Transformer Manufacturers Factory Suppliers

Liquid Immersed Transformer

The performance of S9-M, S10-M, S11-M 22kv series fully sealed oil-immersed distribution transformers meets IEC standards. The core wire is made of high-quality cold-rolled silicon wafers with a

Oil Type Distribution Transformer 20/0.4KV Power Toroidal MOUNTING TRANSFORMER

Oil Distribution transformers are one of the important equipment in the power supply and distribution systems of industrial and mining enterprises and civil buildings. They reduce the network voltage

33/11Kv 5000Kva Oil Immersed Power Distribution Transformer

The iron core of the oil type transformer is made of high permeability grain oriented cold rolled silicon steel sheet, which is a new type of iron core. The fully inclined seam stacked iron core has

H61 22KV Amorphous Core Transformers

Traduction pour : Transfo H61 20KV 160kVA B2H61 Transformer 15(20)kV 160kVA B2Three-phase MV / LV distribution transformer with MV and LV windings in wound copper power P = 160KVA- Compliance: NFC

10 Kv Oil Immersed Transformer

Rated capacity: 30-2000kva. Rated voltage: 10kv. Connection group number: Dyn11, Yyno. Application Environment:. Maximum ambient temperature: +40℃2. Minimum ambient temperature: -25℃. Install in a

Outdoor Oil Immersed Transformer

Outdoor Oil Immersed Transformer Capacity: 0.5KVA-1000KVA Input voltage: 380V Output voltage: 415V 400V 380V 220V 200V 127V 110V 100V 48V 36V Voltage variation rate: ±1% Output waveform distortion:

500 Kva Oil Immersed Transformer

The 500kva oil immersed transformer series is fully sealed and oil-immersed, which has the advantages of low loss, low noise, and desirable energy-saving effects and reduces pollution. Specification

Electric Power Transformer

Electric Power Transformer The performance of S9-M, S10-M, S11-M series fully sealed oil-immersed electric power transformer conforms to IEC standards. The iron core is made of high-quality

Oil Immersed Power Distribution Transformer

The transformer can convert the grid voltage into a voltage matching the system or load, and complete the power transmission and distribution. Instead of silicon steel core transformers, AMDT can be

Pad Mounted Transformer

Product advantages: 1. Compared with other series of oil-immersed transformers of 25 kva and 30 kva, the annual average no-load loss of the transformer we researched and produced has been reduced by

3 Phase Oil Filled Transformer

Low loss 3 phase distribution transformer is an electrical appliance which uses insulating oil as insulating medium and is composed of iron core, coil, voltage regulating switch, oil tank, etc. to

33kV Three Phase Oil Immersed Transformer

Low loss 3 phase distribution transformer is an electrical appliance which uses insulating oil as insulating medium and is composed of iron core, coil, voltage regulating switch, oil tank, etc. to