Low Voltage Electrical Board

Indoor withdrawable GCS low voltage electrical board is suitable for AC 50Hz and 60Hz, rated working voltage 380~680V, low-voltage power distribution system is designed for receiving point, feeder, bus tie, lighting, motor control and power compensation, including PC and MCC. It is a hybrid...

Send Inquiry

Description

Our low-voltage switchgear includes GGD, GCK, GCS, MNS low-voltage switch cabinets, power cabinets, metering boxes, low-voltage integrated distribution boxes, etc. The enclosure protection grade of GCK, GCS, GDF, GGD low-voltage complete sets of equipment can reach the maximum value of IP41.

Low voltage electrical board features:

1. Comply with IEC 60439, GB3906, GB7251 and JB/T9661.

2. Protection level: IP40.

3. The equipment strictly separates each functional room, and the main compartment is divided into functional unit room, bus room and cable room. The function of each unit is relatively independent.

Environmental conditions

1. Ambient temperature: -5℃~+40℃, the 24-hour average is lower than +35℃.

2. Air condition: sunny, relative humidity cannot exceed 50% at the highest ambient temperature + 40℃, but higher relative humidity at low temperature, such as 90% at 20℃, occasionally allowing a small amount of dew when the temperature changes.

3. Pollution protection: Level 3.

4. Altitude: 2000m and below.

5. Installation position: the vertical inclination does not exceed 5 degrees, there is no danger of fire and explosion, no conductive dust, corrosive gas and severe vibration.

Product in assemble: