GGD Low Voltage Fixed-mounted Switchgear

Description

12-2

Our company has been committed to product quality control and enterprise management, "manufacturing quality, service integrity" has always been our firm commitment to customers. The customers of our products are mainly power supply bureau, switch factory and mechanical and electrical equipment company. They sell well in various provinces and autonomous regions in China and have been used by national key factories for many times and exported to Europe, Africa, Southeast Asia and other countries. In the process of use, they have been well received by users.

GGD AC low voltage distribution cabinet

GGD TYPE AC G low voltage distribution cabinet is suitable for power plants, substations, factories and mining enterprises and other power users of the power distribution system of AC 50Hz, rated working voltage 380V, rated working current to 3150A, as the power, lighting and distribution equipment for the conversion, distribution and control.

GGD type ALTERNATING G current low voltage distribution cabinet is a new type of low voltage distribution cabinet designed on the principle of safety, economy, rationality and reliability according to the requirements of the department of Energy and the majority of power users and design departments. The product has the characteristics of high breaking ability, good dynamic and thermal stability, flexible electrical scheme, convenient combination, seriality, strong practicability, novel structure and high protection grade, and can be used as the replacement of low-voltage switchgear.

GGD type ALTERNATING G current low voltage distribution cabinet conforms to IEC 349 "Low voltage switchgear and Control equipment", GB 2751 "Low voltage switchgear" and other standards.

GGD AC low voltage distribution cabinet operating conditions:

◆ The ambient air temperature shall not be higher than +40℃, not less than -5℃, the average temperature within 24 hours shall not be higher than +35℃;

◆ Indoor installation and use, the altitude of the use site shall not exceed 2000m;

◆ The relative humidity of the surrounding air is not more than 50% at the high temperature of +40℃, should be allowed to have a large relative temperature at a lower temperature (such as +20℃ for 90%), considering the impact of temperature changes may occasionally produce condensation;

◆ The inclination of the vertical plane is not more than 5° when the equipment is installed;

The equipment should be installed in the place without violent vibration and impact and not enough to make the electrical components corroded place;

◆ If the user has special requirements, it can be solved through negotiation with the manufacturer.

GGD AC low voltage distribution cabinet main circuit scheme:

The main circuit of GGD cabinet is designed with 129 schemes and a total of 298 specifications (excluding the schemes and specifications derived from the functional changes of auxiliary circuits and control voltage changes).

Among them: GGD1 49 schemes 123 specifications

GGD2 type 53 schemes 107 specifications

GGD3 has 27 plans and 68 specifications

The main circuit scheme was selected after soliciting the opinions of the design and use departments, and increased the scheme needed by power plants. Rated current up to 3150A, suitable for 2000kVA and

The following distribution transformers are selected. In addition, GGJ 1 and GGJ2 capacitor compensation cabinets are designed to meet the needs of reactive power compensation, with 4 main circuit schemes and a total of 12 specifications.

Auxiliary circuit scheme:

The design of auxiliary circuit is divided into two parts: power supply scheme and power plant scheme. GGD cabinet has enough space to install secondary components, and also developed

LMZ3D current transformer is designed to meet the needs of relay protection for power plants and special users.

GGD AC low voltage distribution cabinet main bus:

Considering the price and the feasibility of using aluminum instead of copper, single aluminum bar bus can be used when the rated current is 1500A and below, and double copper bar bus can be used when the rated current is greater than 1500A.

The manufacturer manufactures the prototype according to this specification and passes the type test. Of course, the manufacturer can also change the aluminum bus to the copper bus with the same load capacity according to the customer's request.

The lap surface of bus is treated by tin lining process.

Selection of electrical components

(1).GGD cabinet mainly adopts the more advanced electrical components that can be mass-produced in China. At the same time, according to the principle of economic and reasonable, the feasibility is fully considered

Under the premise of retaining part of the available old products such as DZ10D, DZ20, etc., do not choose the obsolete products.

(2).HD13BX and HS13BX rotary operated knife switch are components designed to meet the needs of GGD cabinet unique structure, and change the operation mode of the mechanism.

Retained the advantages of the old product, is a utility model of electrical components.

(3) If the design department chooses new electrical components with excellent performance and advanced technology according to the needs of users, GGD cabinet has good installation flexibility,

There are generally no manufacturing and installation difficulties due to the components.

(4) In order to further improve the dynamic stability of the main circuit, THE GGD cabinet ZMJ type combined bus clip and insulation support parts are designed. Bus bar clamp by high strength, high flame retardant PPO alloy hot forming, the high dielectric strength, self-extinguishing can, unique structure, only changed between modular blocks can be easily combined into a single or double busbar busbar clamp holder, insulation support sleeve is moulded structure, low cost, high strength, solve the defect of the old product creepage distance is not enough.

GGD AC low voltage distribution cabinet structure features:

(1) GGD type AC low voltage distribution cabinet adopts the form of general cabinet, the frame is made of 8MF cold formed steel by local welding assembly, the frame parts and supporting parts are supplied by the steel fixed production factory, to ensure the accuracy and quality of the cabinet. The components of the general cabinet are designed according to the principle of modules and have 20 mold mounting holes. High general coefficient, can make the factory to achieve pre-production, not only shorten the production cycle, but also improve the work efficiency.

(2). The heat dissipation during the operation of GGD cabinet is fully considered in the design of GGD cabinet. In the cabinet body up and down both ends have different amount of heat sink hole, when the electric component inside the cabinet is calorific, hot air rises, discharge through the upper end slot, and cold air is continuously supplemented by the lower end slot into the cabinet, make the sealed cabinet form a natural ventilation channel from bottom to top, achieve the purpose of heat sink.

(3) GGD cabinet in accordance with the requirements of modern industrial product modeling design, using the method of golden section ratio design cabinet body shape and the partition size of each part, so that the whole cabinet is beautiful and generous, a new look.

(4). The cabinet door is connected with the frame by rotating shaft movable hinge, which is convenient for installation and disassembly. The folding edge of the door is embedded with a mountain rubber strip. When closing the door, the strip between the door and the frame has a certain compression stroke, which can prevent direct collision between the door and the cabinet, and also improve the door protection level.

(5). The instrument door equipped with electrical components is connected with the frame with multiple soft copper wire, and the installation parts in the cabinet are connected with the frame with kneed screws. The whole cabinet constitutes a complete grounding protection system.

(6). The top paint of cabinet body is polyester orange baking paint, which has strong adhesion and good texture. The whole cabinet is matte color, avoiding blinding effect and creating a more comfortable visual environment for the staff on duty.

(7) The top cover of the cabinet body can be removed when necessary to facilitate the assembly and adjustment of the main bus line on site. The four corners of the top of the cabinet are equipped with lifting rings for lifting and loading.

(8). The protection level of the cabinet is IP30. Users can also choose between IP20 and IP40 according to the requirements of the use environment.

12-1