Drawer Switchgear Cabinet

Description

This series of low-voltage drawer switchgear cabinet is suitable for power plants, substations, petrochemicals, metallurgical rolling, transportation energy, light industry and textiles and other factories, mines and residential communities, high-rise buildings and other places. It is used as AC 50 60HZ, rated voltage AC 660V and The following power system power distribution equipment is used for power conversion, distribution and control. Its technology has reached the international level.

Product name	GCS Low voltage drawer switchgear,Switch cabinet
Technical Data
Rated voltage	Rated working voltage	400V	Rated insulation voltage	690V
Rated current	Rated current	up to 400A	Rated short-time withstand current	up to 50KA
	Rated peak withstand current	up to 105KA	Rated frequency	50Hz
Overall size	Width	400, 600, 800, 1000, 1200mm
	Depth	800, 1000mm
	Height	2200mm
Features
1. In accordance with IEC 60439, GB3906, GB7251 and JB/T9661.
2. Protection class: IP40.
3. The device is strictly separate each function room, the main compartment is divided into functional unit rooms, bus room, cable room, the function of each unit are relatively independent.
Environmental Conditions
1. Ambient temperature: -5℃ ~ +40℃, and the average in 24 hours is below +35℃.
2. Air conditions: clear, relative humidity can not exceed 50% at the maximum ambient temperature of +40℃, but higher relative humidity at the low temperature, for example, 90% at 20℃, occasionally, a few of dews is permitted while temperature changes.
3. Pollution protection: 3 grade.
4. Altitude: 2000m and below.
5. Installation location: Vertical inclination is not more than 5 degrees, no fire and explosive danger, no conductive dust, corrosive gas and violent vibration.
Applications
It is widely applied in places like power plants, petroleum, metallurgy, textile and tall buildings, etc.