Dry Type Cast Resin Transformer

Dry Type Cast Resin Transformer

Our dry-type transformers are automatically cast thin insulating tape under vacuum. The magnetic core is made of high-permeability oriented silicon wafers, and is made of imported epoxy resin. Relying on advanced technology, high-quality raw materials, scientific management, and perfect testing methods

Features:

1. The high-voltage winding is made of enameled copper wire, and the low-voltage winding is made of copper foil. The epoxy resin is poured and cured to form a solid whole with good mechanical strength.

2. It is flame-retardant, explosion-proof, does not pollute the environment, and can be installed in the load center.

3. The coil does not absorb moisture

4. High level of resistance to short circuit and lightning impact.

5. The inner and outer resin insulation layer of the coil is thin, and the heat dissipation performance is good.

6. Low loss, good power saving effect, economical operation, and maintenance-free.

7. Small size, light weight, small footprint and easy installation.

Product standards and specifications

1. Standards: GB1094, GB6450-86, GB/T10228-1997, in line with DIN42523, IEC726

2. Capacity range: 3O-16000kVA

3. Voltage level: 10KV, 35kV

4. Voltage regulation method: Non-excitation regulation or on-load regulation

5. Tap range: ±5%, ±2X 2.5%, ±4X2.5%

6. Frequency: 50Hz or 60Hz

7. Number of phases: Three-phase or single-phase

8. Connection group label: Yyn0, Dyn11 or others

9. Short circuit impedance: Standard impedance

1O. The altitude is less than 1000m, and the ambient temperature is less than 40 degrees. When the above conditions are exceeded, the corresponding quota should be adjusted according to the standard

11. High temperature rise: 100K

12. Cooling method: Natural cooling (AN) or air cooling (AF)

13. Protection level: IP00, IP20, IP23

14. Insulation class: Class F

According to different use environments, shells with different protection levels or no shells can be configured. Suitable for important or special environmental places such as high-rise buildings, commercial centers, airports, tunnels, chemical plants, nuclear power plants, ships, etc.

Contact us:

Contact: Charles Du

Mobile: +86 18639199897

E-mail: Fengyuan800@outlook.com

The best choice for the electrical industry!

Please leave an inquiry for more detailed information about prices, packaging, shipping and discounts.

Hot Tags: dry type cast resin transformer, China, manufacturers, suppliers, customized, waterproof transformer, Amorphous Core Dry Type Transformer, dry power transofrmer for industrial, Dry type distribution transformers, 3000kVA Dry Type Transformer, 35kv Dry Type Transformer