Sales Service Provided Warranty 30/0.4KV Power Saver Substation

sales Service Provided Warranty 30/0.4KV power saver substation

 

Box type substation is suitable for residential district, urban public change, bustling downtown, construction power and so on. Users can choose box type change according to different use conditions and load grade. Since the advent of the box substation, it has developed very rapidly. In developed countries, 70% of the distribution transformers have been developed, and the United States has accounted for 90%. The rapid development of China's urban modernization and the renovation of urban distribution network will be widely applied.environment condition.
Box type substations are used in high-rise residential, luxurious villas, square parks, residential areas, small and medium factories, mines, oil fields, and temporary construction electricity and other places to accept and distribute electricity in the distribution system.

Environmental conditions:

Altitude: 1000m and below.
Ambient temperature: - 25 ~ +40 C.

Wind speed: no more than 35m/s.
Arelative humidity: no more than 90% (+25 C).
Seismic horizontal acceleration: no more than 0.4m/s, vertical acceleration: not greater than 0.2m/s.
Place of use: there should be no conductive, dusty, hazardous, corrosive, inflammable and explosive materials harmful to metals and insulators.

The European type substation, is a complete set of new power transformer equipment developed by our company on the basis of transformation of national urban network making the optimal combination for the oil-immersed sealed power transformer and high and low voltage electrical components. Through structure optimization, the switchgear shall be miniaturized to extreme extent which greatly reduce the occupied area of the combined transformer with such advantages as small volume, low noise, reliable power supply, reasonable structure, blexible for installation, easy for operation and capable of going deep into the load center to maximum extent, etc.It can assemble network automation terminal (FTU) in the high-voltage ring network cabinet, realize the reliable detection of short circuit and single-phase grounding fault, and has the function of "four remote", which facilitates the automatic upgrade of network distribution. It is widely used in residential quarters commercial centers stations industrial and mining enterprises airports railroads schools hospitals, high-rise buildings and places.

Features:

1) Smaller occupied area
2) Firm and reliable
3) Easy to move, beautiful and practical
4) Its cost is low, and the installation period is short

 

Procurement Process and Price Range of European Box Transformer Substation

With the increasing global demand for renewable energy, photovoltaic power generation has become an important field. In photovoltaic power generation, the European style box transformer is a commonly used power equipment. This article will introduce the procurement process and price range of European style box transformers for photovoltaic power generation.

Procurement process

1. Requirement confirmation

Firstly, it is necessary to clarify one's own needs, including the rated capacity, voltage level, output current, and other parameters of the box transformer. At the same time, it is also necessary to consider factors such as the usage environment and installation method of the box transformer.

2. Supplier Selection

Select suitable suppliers for inquiry and comparison based on your own needs and budget. You can refer to some authoritative rankings and evaluation reports, such as the "China Photovoltaic Box Transformer Market Research Report".

3. Scheme design

Communicate and negotiate with suppliers to determine the final solution, and conduct technical exchange and evaluation. During this process, attention needs to be paid to the supplier's qualifications and technical strength.

4. Contract signing

After the plan is determined, both parties sign a formal contract. The contract should include product specifications, quantity, price, delivery time, and other contents.

5. Production and manufacturing

According to the contract requirements, the supplier starts producing and manufacturing products. During this process, attention needs to be paid to quality control and production progress.

6. Product quality inspection

After the completion of product manufacturing, strict quality inspection is required. Only products that have passed inspection can be delivered to customers for use.

7. Logistics delivery

After the product passes the inspection, the supplier is responsible for the logistics distribution of the product. During this process, attention should be paid to issues such as safe transportation and moisture-proof and shockproof measures.

8. Installation and debugging

After the product arrives at the customer's site, installation and debugging work needs to be carried out. During this process, it is necessary to pay attention to factors such as installation location and wiring method.

9. After sales service

After the installation and debugging of the product are completed, a certain amount of after-sales service needs to be provided. Including troubleshooting, maintenance and other services.

Price range of European box transformer for photovoltaic power generation

Many customers proactively contact Zhongmeng Electric Group and directly ask how much a photovoltaic box costs. If there are no specific parameters, we can only provide a relatively close estimated price. These prices are generated from past quotes for customers, referencing half of the configurations.

The price range of 10kV European style box transformers for photovoltaic power generation is relatively large, ranging from around 150000 yuan to 700000 yuan per unit. This is mainly related to the high-end configuration and capacity required for this box transformer.

Therefore, please contact our photovoltaic box transformer manufacturer's quotation specialist for specific quotations. It is best to provide a primary electrical system diagram of the box transformer.

 

 

 

 

 

 

 

 

 

 

 

 

Q5 : Is OEM/ODM available?

A: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.

 

Q6 : You are manufacturer or trading company?
A: We are factory, As a 100% professional manufacturer with 20 year's manufacturer experience, we could produce products according to customers' requirements and we could also control the quality of products 100%.

 

Q7 : Can the price be negotiated?

A: Yes, the price is negotiable. It can be changed according to your quantity or package

 

Q8 : How about inspection?

A: We have the whole inspection system from raw material to end products include temperature rise test,salt spraying test conductor type test,mechanical life test.

 

Q9 : What is payment terms?

A: T.T, Paypal,Western Union,Alibaba trade assurance and L/C is acceptable. 30% T/T in advance ,70% balance before shipment.

 

Q10 : What is the service offered by company?

A: We have the professional engineer team which can design and develop the mold to arrive different customer requirement.

We also have the sales team to offer good service from pre-sale to after-sale.

 

 

This product is usually customized.
We are a manufacturer and have a professional technical department that can design and provide solutions according to customer needs.
Please click on the button below to send us the information, and our sales personnel will contact you to provide you with the design drawings

 

Here are our customer examples for your reference

Malaysian clients

TECHNICAL REQUIREMENTS AND CHARACTERISTICS OF EQUIPMENT
Re:82 sets compact substation
Item- No.	Schedule of Technical Data	Unit	Required (at 3000 m	Offered Data
	System Data Requirements
1.05.10	Stranded copper conductor for earthing
	Manufacturer	-
	Material	-	copper
	Cross-section	mm2	>50
	Length	m	>40
1.05.11	Earthing rods
	Manufacturer	-
	Type	-
	Materia!	-
	Length	m
	Sections per rod	pcs
1.6	Compact Substations (Option 1)
	Manufacturer	-		fengyuan
	Type	-		OutDoor
	Overall protection class for complete substation	-	IP 44	IP 44
	Material of enclosure	-		GI
	Overall dimensions (W x L x H)
	for S/S with 1x50 kVA transformer	mm/mm/mm		3000x1850x2150
	■ for S/S with 1x100 kVA transformer	mm/mm/mm		3000x1850x2150
	for S/S with 1x160 kVA transformer	mm/mm/mm		3000x1850x2150
	• for S/S with 1x250 kVA transformer	mm/mm/mm		3000x1850x2150
	Overall weight
	■ for S/S with 1x50 kVA transformer	kg		1000kg.
	■ for S/S with 1x100 kVA transformer	kg		1000kg.
	■ for S/S with 1x160 kVA transformer	kg		1000kg.
	■ for S/S with 1x250 kVA transformer	kg		1000kg.
1.6.1	20 kV Switchgear equipment
	Manufacturer	-		Chnt / Equivalent
	Type	-		Indoor RMU

 

IF NEED MORE DETAILES,PLEASE FEEL FREE YO CONTACT US

Hot Tags: sales service provided warranty 30/0.4kv power saver substation, China, manufacturers, suppliers, customized, Pre installed Transformer Substation, Box Type Combined Substation, Pre installed Box Type Substation, Prefabricated Electrical Substation Box, European style substation, Unitized Substation