
Power Plant Switchgear
GCK low-voltage withdrawable switchgear is composed of two parts: power distribution center (PC) cabinet and motor control center (MCC). Suitable for power users such as power plants, substations, industrial and mining enterprises as AC 50Hz, maximum working voltage to 660V, maximum working...
Description
GCK low-voltage withdrawable switchgear is composed of two parts: power distribution center (PC) cabinet and motor control center (MCC). Suitable for power users such as power plants, substations, industrial and mining enterprises as AC 50Hz, maximum working voltage to 660V, maximum working current to 3150A power distribution system, as power distribution equipment, motor control, lighting and other power conversion equipment For distribution control purposes.
Use environment
1. The ambient air temperature is not higher than +40℃, not lower than -5℃, and the average temperature within 24 hours is not higher than +35℃;
2. The relative humidity does not exceed 50% at the highest temperature +40℃, and higher loudness humidity is allowed at lower temperatures, such as 90% at +20℃;
3. The air is clean, no corrosive and explosive gas, no conductive and insulating dust;
4. Where there is no significant shaking or shock vibration, install vertically, and the inclination should not be greater than 5 degrees;
5. The altitude does not exceed 2000 meters;
6. The switchgear is suitable for transportation and storage at the following temperatures, -25℃ to +55℃, and no more than +70℃ in a short time (not more than 24 hours);
7. The user should consult with the manufacturer when the above conditions are not met.
Features
1. This series of products have high breaking capacity, good dynamic and thermal stability, advanced and reasonable structure, practical electrical scheme, and strong series and versatility;
2. Any combination of various program units, one cabinet contains more circuits, saving floor space, beautiful appearance, high protection level, safety and reliability, and convenient maintenance.
3. This product complies with the ICE439 standard and also complies with the national standard of GB7251 "Low-Voltage Switchgear and Control Equipment".
4. The frame is made of special-shaped steel, the three-dimensional plate is used for positioning, and the bolt connection has no welding structure to avoid welding deformation and production stress, and improve installation accuracy;
5. The mounting holes of the frame and parts are changed according to the modulus E=25mm;
6. The internal structural parts are galvanized, and the exterior is acid-washed and phosphated, and then sprayed with electrostatic epoxy powder;
7. In the power center (PC) incoming cabinet, the top is the horizontal busbar area, and the lower part of the horizontal busbar area is the circuit breaker room;
8. Tilt not more than 5° to the vertical.
Hot Tags: power plant switchgear, China, manufacturers, suppliers, customized, GGD AC Low Voltage Distribution Cabinet, Low Voltage Fixed Type Switchgear, high voltage distribution cabinet, Indoor Low Voltage Switchgear, Low Voltage Complete Switchgear, indoor Distribution Cabinet






