GGD AC Electrical Distribution Panel Board

The GGD AC electrical distribution panel board is designed based on the principles of safety, economy, reasonableness and reliability. The product has the characteristics of high breaking capacity, good dynamic and thermal stability, flexible electrical scheme, convenient combination, series, strong practicability, novel structure, and high protection level.

Use Conditions of GGD AC Electrical Distribution Panel Board:

1. The ambient temperature is not higher than +40℃ and not lower than -5℃.

2. When the GGD power distribution cabinet is installed and used, the altitude of the place of use should not exceed 2000m.

3. The relative humidity of the surrounding air is not more than 90% (+25℃).

4. The equipment should be installed in a place without severe vibration and impact, and in a place where the electrical components are not corroded

Product display

The main technical parameters

Structural features

1. According to the purpose, it is divided into: power receiving cabinet, busbar connection cabinet, feeder cabinet, motor control cabinet, reactive power compensation cabinet, lighting power distribution cabinet.

2. Cabinet structure:

(1) The frame of GGD distribution cabinet is assembled by partial welding of 8MF cold-formed steel. There are mounting holes arranged according to E=20mm and E=100mm modules respectively on the frame to improve the versatility of product assembly.

(2) The ZMJ type busbar clamp, which is thermoformed with high flame-retardant PPO material, has a modular structure with high mechanical strength and insulation.

(3) The 1000mm and 1200mm wide cabinets adopt a symmetrical double-door structure on the front, and the 600mm and 800mm wide cabinets adopt a whole-door structure. The back of the cabinet adopts a symmetrical double-door structure. The cabinet structure is not installed against the wall.

(4) The cabinet door is connected to the frame with a galvanized shaft hinge, which is convenient for installation and disassembly. There are rubber inserts at the folding edge of the door.

(5) The grounding knurled screw structure is used between the installation parts in the cabinet and the frame to form a complete grounding protection circuit.

(6) The top cover of the cabinet can be removed when needed to facilitate the assembly and adjustment of the main bus.

Ordering instructions

Please specify the following information when placing an order:

The complete model of the product includes the main circuit and auxiliary circuit scheme

Main circuit system timing diagram and layout

Auxiliary circuit electrical schematic diagram or wiring diagram

The list of parts contained in the cabinet, including model, specification, quantity and specific technical data

Please inform other special requirements

Hot Tags: ggd ac electrical distribution panel board, China, manufacturers, suppliers, customized, low-voltage switchgear, distribution board, High Voltage Switchgear, Low Voltage Switchgear Equipment, Low Voltage Switchgear Panel, 400V Outdoor JP Cabinet