AC Low Voltage Switch Cabinet

Description

The low voltage switch cabinet is suitable for power distribution systems in power plants, petroleum, chemical, metallurgical, textile and high-rise building industries; used in large power plants and petrochemical systems with high degree of automation and computer interfaces, used as power supply systems, power distribution systems, Motor centralized control, low-voltage power distribution equipment and reactive power equipment in low-voltage power distribution equipment three-phase AC frequency is 50 (60) Hz, rated working voltage is 380V (400) V, (600) V, rated current is 4000A and below Power compensation.

AC Low Voltage Switch Cabinet Low Voltage Withdrawable Switchgear

Normal use conditions

1. The ambient temperature must not be higher than + 40°C, not lower than -5°C, and the average temperature within 24 hours must not be higher than + 35°C;

2. At the highest temperature + 40°C, the relative temperature should not exceed 50%, and higher relative temperatures are allowed at lower temperatures, such as 90% at +20°C;

3. The air is clean, free of corrosive and explosive gases, and free of conductive and insulating dust:

4. In the absence of obvious shaking and shock vibration, it should be installed vertically, and the inclination should not be greater than 5 degrees; the altitude should not exceed 2000m;

5. The switchgear is suitable for transportation and storage at the following temperatures: -25C to +55C, within a short period of time (not more than 24 hours) not more than +70c;

6. If the above conditions cannot be met, the user should consult the manufacturer.

Power Distribution Switch Cabinet