KYN28A-12 Armored Metal Enclosed Switchgear
KYN28A-12 Armored Metal Enclosed Switchgear It is suitable for three-phase AC rated voltage 12kV, rated frequency 50Hz power system, used to receive and distribute electric energy and control, protect and monitor the circuit. Conditions of Use: 1. Ambient temperature: the highest temperature...
Description
KYN28A-12 Armored Metal Enclosed Switchgear
It is suitable for three-phase AC rated voltage 12kV, rated frequency 50Hz power system, used to receive and distribute electric energy and control, protect and monitor the circuit.

Conditions of Use:
1. Ambient temperature: the highest temperature +40°C, the lowest temperature -15°C (under special technology, it can reach -45°C);
2. Environmental humidity: daily average ≤95%, monthly average ≤90%;
3. Altitude: below 1000m;
4. Earthquake resistance; earthquake intensity does not exceed 8 degrees;
5. The surrounding air should not contain corrosive or flammable gas, water vapor and other obvious pollution;
6. There is no serious pollution and frequent severe vibration, and the severity design meets the requirements of category 1 under severe conditions;
7. When used under normal environmental conditions exceeding GB3906, it shall be negotiated by the user and the manufacturer.
Note: ① The electric heater should be switched on when the relative humidity is greater than 70%.
② Where the altitude exceeds 1000m, it shall be handled in accordance with the regulations of JB/Z102-71.


Hot Tags: kyn28a-12 armored metal enclosed switchgear, China, manufacturers, suppliers, customized, metal enclosed switchgear device, Indoor Electrical Switchgear, 12kv High Voltage Switchgear, three phase Switchgears, HV Switch Cabinet, medium voltage metal enclosed switchgear








