Amorphous Core Transformer

Epoxy resin cast three-phase dry amorphous core transformer Product model: SCBH15 series Rated capacity: 160KVA Rated frequency: 50Hz Voltage regulation method: no excitation voltage regulation Pressure regulating position: high pressure side Voltage regulation range: 10KV±2*2.5% Technical...

Send Inquiry

Description

Epoxy resin cast three-phase dry amorphous core transformer

Product model: SCBH15 series

Rated capacity: 160KVA

Rated frequency: 50Hz

Voltage regulation method: no excitation voltage regulation

Pressure regulating position: high pressure side

Voltage regulation range: 10KV±2*2.5%

500 KVA Three Phase Dry Type Electrical Transformer

Technical parameters:

Rated Capacity	Voltage Combination			Winding Connection Grade	No-load Loss (W)	Load Loss (W)	Short Circuit Impedance (%)	No-load Current (A)
Rated Capacity	High Voltage (kV)	Tapping Range Of High Voltage (%)	Low Voltage (kV)		No-load Loss (W)	Load Loss (W)	Short Circuit Impedance (%)	No-load Current (A)
50	35	±5 ±2×2.5%	0.4		450	1420		1.6
100					630	2099		1.4
160					790	2810		1.3
200					880	3320		1.2
250					990	3800		1.1
315					1170	4510		1.1
400					1370	5410		1.0
500					1620	6650		1.0
630					1860	7690	6	0.9
800					2160	9120		0.8
1000					2430	10400		0.8
1250					2830	12700		0.7
1600					3240	15400		0.6
2000					3820	18200		0.6
2500					4455	21800		0.5

Features of dry type amorphous core transformer

1. It is safe, fireproof and pollution-free, and can be installed directly in the load center.

2. Maintenance-free, easy to install, and low total operating cost.

3. It has good moisture resistance and can work normally under 100% humidity. After stopping the operation, it can be put into operation again without stopping the pre-drying.

4. Low loss, low partial discharge, low noise, good heat dissipation capacity. Under forced air cooling, it can run at 150% of the rated load.

5. Equipped with a complete humidity protection and control system to provide reliable humidity

Amorphous Core Transformer