In the era of global economy, we insist on the excellent quality of all products and continue to develop diversified new series of Single Phase Overhead Transformer, Compact Prefabricated Substation Mobile Substation, Metal-enclosed Switchgear Cabinet in order to make the enterprise sustainable. We are highly innovative and innovative development ideas and constantly improve the international scientific management standards to meet the needs of customers. We always carry on the production with high standard and strict requirements, control the quality and prevent the defective products from leaving the factory, so as to ensure the stable performance of the products! It is necessary to update the corporate quality management concept at any time and continuously improve the level of technology and quality to survive and develop in the fierce market environment where opportunities and challenges coexist. We welcome you to visit our factory and look forward to establishing friendly business relationships with customers at home and abroad in the near future.

Cast resin dry-type distribution transformer

Product description:

SC(B)10 dry-type transformer

Better fire performance, maintenance-free, pollution-free, easy to install!

It is an ideal choice for modern business centers and other public places with high demand for fire protection!

Product overview

The performance indicators of the dry-type transformers produced by the company have reached various standards, and have been proved by users to be reliable in operation and reach the national advanced level. This series of products are manufactured with advanced foreign technology, and the design drawings and technical documents are complete, accurate and clear. The company has advanced production equipment, stable production technology and perfect testing methods, which provide a solid guarantee for the production of high-quality products.

Product Usage

SC(B)10 epoxy resin cast dry-type transformer is manufactured according to the dry-type power transformer standard. It has the characteristics of low loss, good energy-saving effect, economic operation and maintenance-free. In addition to the metal with high process structure, short circuit resistance and lightning impact rating, it also has the characteristics of flame retardancy, moisture resistance, dust resistance and low noise, and can be connected to the load center. It is widely used in high-rise buildings, airports, stations, docks, power plants, substations, etc. It is especially suitable for places with high fire protection requirements for flammable and combustible materials. Can not provide IP00 protection grade, IP20 and IP23 protection grade protective cover according to customer requirements. The shell is made of ordinary steel plate, corrosion-resistant plate and aluminum alloy and other materials, and then pickled, phosphated and sprayed according to customer requirements. The temperature control indicator and load recorder are installed on the low-pressure side of the shell, which is easy to observe, safe and reliable.

Performance parameter

1. Number of phases: three phases.

2. Frequency: 50Hz.

3. Insulation durability grade: F grade.

4. Average temperature rise of winding: ≤100K.

5. Partial discharge amplitude: <5pc.

three phase dry type electric transformer

1.Safe, fireproof, no pollution, it can be installed directly in the load center.
2.Free maintenance, easy to install, low total operating costs.
3.With good moisture resistance, it can work normally under the100% humidity. After it stopped operating, the outage without pre-drying can be put into operation again.
4.Low loss, low partial discharge, low noise, good heat dissipation capacity. Under the forced air cooling conditions, it can run at 150% rated load.
5.The equipped perfect humidity protection & control system can provide reliable

Function Characteristics:

1. Flame retardant, non-pollution, it can be installed directly in the load center.
2.Maintenance-free, easy to be installed, low operating costs.
3.The enclosure can be of Good moisture resistance, transformer can be put into operation without pre-drying under 100% humidity in the normal operation.
4.Low loss, light weight and small volume, low noise, good dissipation of heat, it can be 150% rated load operation under forced air cooling conditions.
5.Equipped with a complete temperature protection control system to provide reliable protection for the safe operation of
transformers.
6.High reliability. The results of checking for the products that has been put into operation show that the reliability index has reached the international advanced level.

Structural Characteristics:

Cast-foil Coil: Adopting the entire section of copper foil, together with the F-class turn insulation, low voltage winding is wound by the special low-voltage foil winding machine. The foil coil resolves such understanding problems as large short-circuit stress, uneven ampere turn, poor heat dissipation, existing the winding spiral angle as well as unsteady manual welding quality due to low voltage and large current coil winding products. At the same time, the winding end in our company is treated with resin potting, solidification to make shape, moisture-proof and anti-fouling, the lead copper platoon is automatically welded by argon arc welding.

Temperature Control Device: the transformer adopts BWDK series of signal thermometer. The temperature components, are embedded in the upper half of the low-voltage coil, can automatically detect and dynamically display the work humidity of phase coils and also have the functions of over-temperature alarm and trip.

PRODUCT PHOTO

COMPANY OVERVIEW

EXHIBITION

Our Services

1.Pre sale service

a. make technical solution

b. send quotation, technical data sheet and drawing

c. prepare power transmission plan, testing plan and shipment plan

2. In sale service

a. supervise the manufacturing schedule totally in accordance with the plan

b. send photos to customer during every manufacturing process(hold point)

c. inform the customer one week before testing.

d. quick response within 12 hours any time.

3. After sale service

a.All parts are under One Year Warranty.

b. Technical Documents:

Original operation and service manuals, the service manual is completed with wiring diagram, block diagram and trouble shooting information.

c. Installation

Usually, clients can do the installation and operation by themselves when following the detailed English user manual.

This product is usually customized.

We are a manufacturer and have a professional technical department that can design and provide solutions according to customer needs.

Please contact our sales personnel to obtain design drawings

Here are our customer examples for your reference

Kazakhstan Customers

IF NEED MORE DETAILES,PLEASE FEEL FREE TO CONTACT US

Our company has always been adhering to the service tenet of 'unity, pragmatism, innovation, and integrity'. With high-quality, low-cost products, excellent service, and years of hard work by all employees, our company has developed into a professional manufacturer of Scb Series 30kVA 10/0.4kv Dry Type Cast Resin Distribution Transformer for Power Distribution. Welcome your inquiry! We also ensure that your choice is going to be crafted with the highest good quality and dependability.