33kv Outdoor Power Distribution Transformer

1. Overview

ZRTBBX high voltage fixed reactive power compensation complete set (hereinafter referred to as the device), suitable for 6-35kV. The 50Hz AC power system is mainly used to adjust bus voltage and reactive power, improve power factor, improve voltage quality and reduce network loss.

2. Implementation of standards

GB 50227-2008 "Code for design of shunt capacitor Devices"

JB/T7111-1993 "High voltage parallel capacitor Peng Device"

JB/T 10557-2006 "High voltage reactive power on-site compensation Device"

DL/T 604-1996 "Technical conditions for ordering high voltage shunt capacitor deleting Device"

3. Use environmental conditions

3.1 Cabinet type indoor installation, frame type general outdoor installation;

3.2 The altitude of the installation and operation site shall not exceed 1000 meters, and the place over 1000 meters shall negotiate the order;

3.3 The ambient air temperature at the installation and operation site is -25℃~+45℃ for indoor devices and -40℃ ~+45℃ for outdoor devices

3.4 The installation and operation site is free from severe mechanical vibration, corrosive gas and steam, and conductive explosive dust;

3.5 The network or bus voltage connected to the installation site should not be affected by higher-order harmonic sources, and the voltage waveform distortion rate and harmonic content should not exceed those specified in GB/T14549-93 "Voltage Quality, Harmonics in Public Power grid".

Related Products:

FAQ:

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 1-2 weeks.

Q3. Do you have any MOQ limit for order?

A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6. Is it OK to print my logo on product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new one with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Hot Tags: 33kv outdoor power distribution transformer, China, manufacturers, suppliers, customized