With the spirit of 'professionalism, dedication and concentration', we will welcome new and old friends from domestic and foreign merchants to visit and guide our company, work together and make contributions to the development of the Oil immersed Transformer, Switchgear in power system, compact package kiosk substation industry. We have won the full trust of customers at home and abroad with our scientific and standardized management system and warm and thoughtful service. We are fully aware of our customer's needs. We are willing to achieve greater brilliance and progress with full of passion, standardized operation and management.

SC(B)10 Cast Resin Dry Type transformer:

Better fire performance, maintenance-free, pollution-free, easy to install!

Cast resin dry-type distribution transformer is an ideal choice for modern business centers and other public places with high demand for fire protection!

Specifications:

Capacity range: 80-1600KVA

Voltage level: 10KV,

Voltage regulation method: ±2×2.5% or ±5%

Frequency: 50HZ

Number of phases: 3 phases or single phase

Connection group label: Yyno or Dyn11

Impedance voltage: see technical parameter table for standard impedance voltage

Conditions of use: The ambient temperature is not higher than 40℃, the relative humidity can reach 100%, the altitude is not more than 1000 meters, and the indoor air exchange rate is calculated based on the total loss of the transformer, not less than 4m3/KM.min

Cooling method: AN or AF

Protection notice: IP00 or IP20 (indoor), IP23

Insulation heat resistance class: H-class winding allows an average temperature rise of 125K

Temperature limit: 180℃

three phase dry type electric transformer

1.Safe, fireproof, no pollution, it can be installed directly in the load center.
2.Free maintenance, easy to install, low total operating costs.
3.With good moisture resistance, it can work normally under the100% humidity. After it stopped operating, the outage without pre-drying can be put into operation again.
4.Low loss, low partial discharge, low noise, good heat dissipation capacity. Under the forced air cooling conditions, it can run at 150% rated load.
5.The equipped perfect humidity protection & control system can provide reliable

Function Characteristics:

1. Flame retardant, non-pollution, it can be installed directly in the load center.
2.Maintenance-free, easy to be installed, low operating costs.
3.The enclosure can be of Good moisture resistance, transformer can be put into operation without pre-drying under 100% humidity in the normal operation.
4.Low loss, light weight and small volume, low noise, good dissipation of heat, it can be 150% rated load operation under forced air cooling conditions.
5.Equipped with a complete temperature protection control system to provide reliable protection for the safe operation of
transformers.
6.High reliability. The results of checking for the products that has been put into operation show that the reliability index has reached the international advanced level.

Structural Characteristics:

Cast-foil Coil: Adopting the entire section of copper foil, together with the F-class turn insulation, low voltage winding is wound by the special low-voltage foil winding machine. The foil coil resolves such understanding problems as large short-circuit stress, uneven ampere turn, poor heat dissipation, existing the winding spiral angle as well as unsteady manual welding quality due to low voltage and large current coil winding products. At the same time, the winding end in our company is treated with resin potting, solidification to make shape, moisture-proof and anti-fouling, the lead copper platoon is automatically welded by argon arc welding.

Temperature Control Device: the transformer adopts BWDK series of signal thermometer. The temperature components, are embedded in the upper half of the low-voltage coil, can automatically detect and dynamically display the work humidity of phase coils and also have the functions of over-temperature alarm and trip.

Features of Epoxy Resin Cast Dry-type Transformer:

1. Low loss: the product no-load loss is reduced by more than 35%, with excellent energy-saving effect, economical operation and maintenance-free.

2. Low noise: The noise level of the product is more than 10-15 decibels lower than the current professional standard.

3. Environmental protection: Resin insulation has both full encapsulation and inter-turn immersion. Insulating materials such as glass fiber winding the coil have self-extinguishing characteristics, will not generate arc due to short circuit, and the resin will not generate toxic and harmful gases under high heat.

4. High heat resistance strength: The high and low voltage coils are all encapsulated and insulated with thin epoxy resin, with large thermal conductivity and good heat dissipation performance.

5. Small size, light weight, less space and low installation cost.

6. The shell material is stainless steel or aluminum alloy. The inflow of water droplets within 0° angle is suitable for outdoor operation.

7. Temperature control system: If the temperature is too high, the temperature controller will send out an alarm signal, and it will trip by itself when the temperature exceeds a safe value.

PRODUCT PHOTO

COMPANY OVERVIEW

EXHIBITION

FAQ

Q5 : Is OEM/ODM available?

A: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.

Q6 : You are manufacturer or trading company?
A: We are factory, As a 100% professional manufacturer with 20 year's manufacturer experience, we could produce products according to customers' requirements and we could also control the quality of products 100%.

Q7 : Can the price be negotiated?

A: Yes, the price is negotiable. It can be changed according to your quantity or package

Q8 : How about inspection?

A: We have the whole inspection system from raw material to end products include temperature rise test,salt spraying test conductor type test,mechanical life test.

Q9 : What is payment terms?

A: T.T, Paypal,Western Union,Alibaba trade assurance and L/C is acceptable. 30% T/T in advance ,70% balance before shipment.

Q10 : What is the service offered by company?

A: We have the professional engineer team which can design and develop the mold to arrive different customer requirement.

We also have the sales team to offer good service from pre-sale to after-sale.

This product is usually customized.

We are a manufacturer and have a professional technical department that can design and provide solutions according to customer needs.

Please contact our sales personnel to obtain design drawings

Here are our customer examples for your reference

Kazakhstan Customers

IF NEED MORE DETAILES,PLEASE FEEL FREE TO CONTACT US

It is necessary for us to improve and optimize the quality of Power Supply High Quality 3 Phase 10kv 1600kVA 400V Epoxy Cast Resin Dry Type Power Transformer in order to make our products more competitive in the market. After years of development, we have solid customer service experience and first-class after-sales service concept. Our mission is to make unremitting efforts to create a better working and living environment for mankind!